INTRANZ

Flat shield leather edge 88

  • Straight round shield made of birch plywood,
  • front side covered with linen,
  • rope sewn onto the rim and covered with leather as impact protection and protective rim for the active shield,
  • hand-forged, blackened hump,
  • riveted ash wood handle

Photo: Flat round shield from front

Material: birch plywood, linen, hemp rope, leather, iron, ash wood
Diameter: 88 cm
Thickness of the shield: 7,5 mm
thickness of the rim: 19 mm
thickness of the rope: approx. 12 mm
thickness of the leather: approx. 3,5 mm
Weight: 4050 g

Weights

weight part weight parts
2450 g Wood 2450 g Basic body
510 g Glue and fabric 510 g Fabric cover
128 g Rope 741 g Edge
19 g thread
554 g Leather
10 g thread
305 g hump 330 g hump and handle
42 g Handle
8 g Washers
17 g Rivets
30 g Colour 30 g Colour
4050 g Total 4050 g Total

Weight index 0,67 g/cm2

Photo: Flat round shield from behind From behind

Photo: Flat round shield from the side From the side

Photo: Detail of shield hump from the side The hump

305 g Buckel
2505 g wood
698 g cutting of the snow.

3025 g with fabric and glue
so 520 g fabric and glue

Before the cutting process
Rope 186 g - 68 g waste gives 128 g rope\\. yarn 46 g remainder 27 g results in 19 g processed

With yarn and rope 3160 g
so 135 g yarn and rope
Error 12 g

27 g - 17 g so 10 g yarn
leather 637 g -53 g waste and -30 g phase cut (bevelling the leather) so 554 g leather

with leather = 3754 g

Cutting out the opening 66 g wood to fabric = 5.817 to 1 = 56.318 g to 9.681 g

2505 g wood - 56 g = 2449 g

520 g fabric and glue - 10 g = 510 g

Total weight 3993 g

Handle 42 g
8 g washer
17 g rivets
calculated 4060 g

30 g Colour

Defect 10 g

4050 g

  • en/anleitungen/schild_rund_flach_88.txt
  • Zuletzt geändert: 2022-06-07 11:02
  • von Falke